欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-2820 Series 16-port industrial switch with non-network management and rail

2 optical port + 14 electrical port | 100M | SC optical port

  • Model: HS-2820A-2S-SC
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 14
  • Port_rate(RJ45): 100M
  • Optical_port_type: SC/ST(155M)
  • NO.100_trillion(155M)SC/ST: 2
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Double
  • Temperature_range: -40℃~75℃
  • Serial_port_type: RS232

Main Features:

  • Support 14-10 / 100M RJ45 ports

  • Support 2-100m SC / ST optical ports

  • Comply with IEEE 802.3 10 Mbps Ethernet standard, IEEE 802.3u 100 Mbps Ethernet standard, IEEE 802.3x flow control standard

  • Store and forward switching mechanism is adopted to support rate adaptability and ensure data integrity

  • It supports full duplex / half duplex automatic monitoring, adaptive communication mode and MDI / MDI-X port adaptive, and cross line and through line can be used freely

  • Non blocking switching fabric, full line speed forwarding

  • Port LED status indication, which can easily detect the link connection, rate, data receiving and sending status of each port

  • Port automatic MAC address learning and aging function

  • The alarm of power supply, optical fiber port and RJ45 electric port can be set flexibly. At the same time, it supports LED, menu alarm prompt and relay alarm output

  • Low power design, all using DC-DC switching power supply, high efficiency, low power consumption

  • Industrial standard, no fan structure design

  • IP40 protection, corrugated high strength housing

Product Introduction:

HS-2820A-2S-SC is a 16 port (14 + 2) rail type non network management Industrial Ethernet switch with high port density independently developed by Chengdu Huashu Communication Technology Co., Ltd. It is a switching device designed with high-speed single chip switching scheme to use Ethernet protocol networking in industrial production environment. It is simple, convenient, fast, stable and reliable. It adopts industrial high-strength IP40 shell design with high EMC protection level to ensure the stable and reliable operation of the equipment in the industrial field environment. It supports 2-way 100M Ethernet optical fiber interface (optional SC / ST interface), 14-10 / 100M Ethernet electrical interfaces (RJ45), 10Base-T, 100Base-TX, 100Base-FX, full duplex, half duplex and MDI / MDI-X adaption, and can select single mode (SM) or multi-mode (MM) mode.

HS-2820 Series has redundant dual power supply DC input function with extremely wide voltage range (10 ~ 55V), which greatly improves the adaptability and reliability of power input and protects the reliable transmission of network data of industrial automation system. The device has relay alarm output port, which can be set flexibly and richly with humanized alarm output function, such as power operation, optical and electrical port link alarm. When there is power failure or optical and electrical port link, the relay will quickly respond to output alarm signal, so as to timely inform the field personnel of maintenance and troubleshooting. HS-2820 series products meet the FCC and CE standards, meet the industrial level 4 design requirements, support the normal operation under the condition of wide temperature - 40 ℃ ~ 75 ℃, adapt to the harsh working environment conditions, meet the operation requirements of the industrial site, and provide a powerful means and network system solutions for the construction and operation of the customer's industrial real-time data network.



Specifications

Explain

Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

Supporting media

10BASE-T CAT3、4、5 UTP(≤100m)

100BASE-TX CAT5 UTP(≤100m)

100BASE-FX Single mode / multimode fiber, SC / ST / FC interface optional

Network interface

14-10 / 100Mbps adaptive Ethernet RJ45 shielded ports

2-155mbps single mode / multimode optical ports (SC/ST/FC)

Alarm port

1-way relay normally closed / normally open alarm / i/o port control output

Dial switch

4 bits, link / power alarm on / off

Exchange mode

Storage forwarding

Flow control

Half duplex back pressure, full duplex ieee802.4x

Spanning tree algorithm

STP/RSTP/MSTP

Exchange capacity

6.6Gbps

Packet cache size

12Mbits

MAC address table

16K

Indicator light

Power indication :PEWR1,PWR2

Equipment operation indication:RUN

Alarm indication :ALARM

Electric port indication 10m, 100m

100M / gigabit optical port indication:LIMK/ACT 

Transmission distance

Twisted pair 100 m (standard CAT 3,4,5 UTP)

Multimode fiber 850nm, 2km

Multimode fiber 1310nm, 5km

Single mode fiber 1310nm, 20km

Single mode fiber 1310nm, 40km

Single mode fiber 1310nm, 60km

Single mode fiber 1550nm, 80km

Power Supply

Support single / dual 24 VDC redundant input (10 ~ 55 VDC)

Power terminal

4-core 5.08mm spacing terminals, over-voltage, over-current, reverse connection protection, dual power redundancy protection

Power waste 

no-load power 3.50W(24VDC/0.15A)

Full load power 4.10W(24VDC/0.17A)

Working temperature

-40℃-75℃

Storage temperature

-40℃~85℃

Relative humidity

5%~95%(No condensation)

Mechanical structure

IP40 protection grade design, corrugated high strength metal shell

DIN rail type installation is adopted

Size: 137mm x 130mm x 90mm (L x W x H)

Industry standard

EMI: FCC Part 15,CISPR (EN55022) class A
EMS:EN61000-4-2 (ESD),Level 4
          EN61000-4-3 (RS),Level 3
          EN61000-4-4 (EFT),Level 4
          EN61000-4-5 (Surge),Level 4
          EN61000-4-6 (CS),Level 3
          EN61000-4-8,Level 5

Attack

IEC 60068-2-27

Free fall

IEC 60068-2-32

Shock 

IEC 60068-2-6

Warranty

5 years

Authentication

CE, FCC, ROHS, UL508 (in certification)

Please check the company's website for the latest certification of products

 



 


Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-2820 Series Brief Introduction 2.0.pdf


Product Manual

HS-2820-2S(M)  Manual 2.0.pdf







Model
Port
Power input 
Remarks
10/100M Electric port

100 trillion optical port

Type of 100m optical interface

Gigabit / 100M optical interface

Optical fiber system

HS-2820A-8S/6S/4S/2S(M)-SC(T)-4GSFP
8/10/12/148/6/4/2

SC/ST

4Single  / multi modeDC 10~55V
Standard type
HS-2820B-8S/6S/4S/2S(M)-SC(T)-4GSFP8/10/12/148/6/4/2SC/ST4Single  / multi modeDC 10~55VBasic type
HS-2820A-4GSFP
160-----
4Single  / multi modeDC 10~55V
Standard type
HS-2820B-4GSFP160-----4Single  / multi modeDC 10~55VBasic type
HS-2820A-8S/6S/4S/2S(M)-SC(T)-4GSFP8/10/12/148/6/4/2SC/ST 2 Single  / multi modeDC 10~55VStandard type
HS-2820B-8S/6S/4S/2S(M)-SC(T)-4GSFP8/10/12/148/6/4/2SC/ST 2 Single  / multi modeDC 10~55VBasic type
HS-2820A-2GSFP
160----- 2Single  / multi modeDC 10~55VStandard type
HS-2820B-2GSFP160----- 2 Single  / multi modeDC 10~55VBasic type
HS-2820A-8S/6S/4S/2S(M)-SC(T)8/10/12/148/6/4/2SC/ST 0Single  / multi modeDC 10~55VStandard type
HS-2820B-8S/6S/4S/2S(M)-SC(T)8/10/12/148/6/4/2SC/ST 0Single  / multi modeDC 10~55VBasic type
HS-2820A-TX160----- 0 -----DC 10~55VStandard type
HS-2820B-TX160----- 0 -----DC 10~55VBasic type

 

Batch purchase / product customization
【Business Hotline】:028-85199391 OR 18980011235
【Contact Email】:652503928@qq.com

Home
Product
Select
Contact us