欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-6412 Series 12-port industrial switch with non-network management and rail

Full Gigabit | 4-SFPs optical ports + 8-RJ45 electrical ports | simple networking

  • Model: HS-6412A-4GSFP
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 8
  • Port_rate(RJ45): 1000M
  • Optical_port_type: SFP(LC/SC)
  • NO.SFP_(LC/SC): 4
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Double
  • Temperature_range: -40℃~75℃
  • Serial_port_type: RS232

Main Features

  • Comply with IEEE 802.3 10 Mbps Ethernet standard, IEEE 802.3u 100 Mbps Ethernet standard, IEEE 802.3ab 1000 Mbps Ethernet standard, IEEE 802.3x flow control standard;

  • Store and forward switching mechanism is adopted to support rate adaptability and ensure data integrity

  • Support full duplex / half duplex automatic monitoring, adaptive communication mode and MDI / MDI-X port adaptive, cross line and through line can be used freely;

  • Non blocking switching structure, full line speed forwarding;

  • Port automatic MAC address learning and aging function

  • Port LED status indication, which can easily detect the link connection, rate, data receiving and sending status of each port;

  • The alarm of power supply, optical fiber port and RJ45 electric port can be set flexibly. At the same time, it supports led, menu alarm prompt and relay alarm output;

  • Low power design, all using DC-DC switching power supply, high efficiency, low power consumption

  • Industrial standard, no fan structure design

  • IP40 grade protection, corrugated high strength shell;


Product Introduction:

HS-6412 Series is a full Gigabit rail type non network management Industrial Ethernet switch with powerful high-speed communication function independently developed by Chengdu Huashu Communication Technology Co., Ltd. It is a switching device designed with high-speed single chip switching scheme and networking with Ethernet protocol in industrial production environment. It is simple, convenient, fast, stable and reliable. It adopts industrial high-strength IP40 shell design with high EMC protection level to ensure the stable and reliable operation of the equipment in the industrial field environment.

HS-6412 Series can support 2 / 4 Gigabit Ethernet optical fiber SFPs pluggable module interfaces (LC / SC interfaces are optional), 8 10 / 100 / 1000Mbps Ethernet interfaces (RJ45), 10Base-T, 100Base-TX, 1000Base-T, and full duplex, half duplex and MDI / mdi-x adaption. Optical fiber interface supports 1000base-x, and single mode (SM) or multi-mode (mm) mode is optional.




 Specifications

Explain

 Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

 Supporting media 

10BASE-T CAT3、4、5 UTP(≤100m)

100BASE-TX CAT5 UTP(≤100m)

1000BASE-T CAT6 UTP(≤100m)

SFP pluggable module support: 1000Base-x and 100Base-FX, single mode / multimode fiber, LC / SC interface optional

 Network interface

8-10 / 100 / 1000Mbps adaptive Ethernet RJ45 shielded ports

Four single mode / multi mode interfaces (LC / SC) for Gigabit SFP modules

 Alarm port

One relay normally closed / normally open alarm / I / O port control output

 Dial switch

4 bits, super ring function enable / disable, master / slave device setting

 Exchange mode

Store and forward

 Flow control

Half duplex back pressure, full duplex ieee802.3x

 Spanning tree algorithm

STP/RSTP

 Exchange capacity

24Gbps

 Packet cache size

4Mbits

 MAC address table

8K

 Indicator light

Power indication:PWR1,PWR2

Device operation indication:RUN

Ring operation indication:RING

Alarm indication:ALARM

Port indication :LINK/ACT, 10m, 100m, 1000m

100 megabyte / Gigabyte optical port indication:LINK/ACT

 Transmission distance

Twisted pair 100m (standard CAT3, 4, 5, 6 UTP)

Multimode fiber 850nm, 2km

Multimode fiber 1310nm, 5km

Single mode fiber 1310nm, 20km

Single mode fiber 1310nm, 40km

Single mode fiber 1550nm, 60km

Single mode fiber 1550nm, 80km

 Power Supply

Support single / double circuit 24VDC redundant input (10-55vdc)

 Power terminal

4-core 5.08mm spacing terminals, over-voltage, over-current, reverse connection protection, dual power redundancy protection

 power waste 

no-load power 6.80W(24VDC/0.28A)
Full load power 11.80W(24VDC/0.49A)

 Working temperature

-40℃-75℃

 Storage temperature

-40℃~85℃

 Relative humidity

5%~95%(No condensation)

 Mechanical structure

IP40 protection grade design, corrugated high strength metal shell

DIN rail type installation is adopted

Size: 137mm x 130mm x 70mm (L x W x H)

 Industry standard 

EMI: FCC Part 15,CISPR (EN55022) class A
EMS:EN61000-4-2 (ESD),Level 4
          EN61000-4-3 (RS),Level 3
          EN61000-4-4 (EFT),Level 4
          EN61000-4-5 (Surge),Level 4
          EN61000-4-6 (CS),Level 3
          EN61000-4-8,Level 5

 Attack 

IEC 60068-2-27

 Free fall

IEC 60068-2-32

 Shock 

IEC 60068-2-6

 Warranty 

5 years

 Authentication

CE, FCC, ROHS, UI508 (under certification)

Please check the company's website for the latest certification information


Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-6412 Series Brief Introduction 2.0.pdf


Product Manual

HS-6412 Series Manual 2.0.pdf






Model
Port
Power inputRemarks

1000M

Electric port

Gigabit optical portInterface typeOptical fiber system
HS-6412A-GTX80------DC 10~55V
Standard type
HS-6412A-2GSFP82LC/SCSingle mode / multimodeDC 10~55VStandard type
HS-6412A-4GSFP84LC/SCSingle mode / multimodeDC 10~55V
Standard type
HS-6412B-GTX80    ---      ---DC 10~55V
Basic type
HS-6412B-2GSFP82LC/SCSingle mode / multimodeDC 10~55VBasic type
HS-6412B-4GSFP84LC/SCSingle mode / multimodeDC 10~55VBasic type


Batch purchase / product customization
【Business Hotline】:028-85199391 OR 18980011235
【Contact Email】:652503928@qq.com



Home
Product
Select
Contact us