欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-2005 Series 5-port industrial switch with non-network management and rail

5- full RJ45 port | 100M | small port density | plug and play

  • Model: HS-2005A-TX
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 5
  • Port_rate(RJ45): 100M
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Double
  • Temperature_range: -40℃~75℃
  • Serial_port_type: RS232

Main Features;

  • Support 5-10 / 100M RJ45 ports

  • Support 10 / 100M adaptive, full duplex / half duplex, MDI / MDI - X-ray sequence automatic exchange function

  • Store and forward, full line speed data processing mechanism

  • Stable and reliable high-end switching chip is adopted to meet the stable and reliable operation needs of industrial field environment

  • Redundant dual channel wide voltage range (10 ~ 55v) DC power input, strong voltage adaptability

  • Ultra low power consumption, DC-DC switching power supply design, high power efficiency, small heat

  • Flexible relay alarm output setting

  • IP30 grade protection, corrugated high strength metal shell, DIN rail type installation

  • Special equipment for data aggregation and transmission in urban intelligent transportation network, urban security, Skynet system and other fields

 Product Introduction:       

HS-2005A-TX is a 5-port rail type non network management Industrial Ethernet switch, which supports RJ45 Ethernet electrical interface and adopts the high-end switching chip with the largest market share in the industry. It has strong performance, stable operation and reliability, and is especially suitable for the requirements of high-speed, reliable and stable networking between devices in the industrial field environment. HS-2005A-TX provides five 10 / 100M Ethernet RJ45 ports, providing highly flexible combined application for interconnection and data transmission between device ports.

HS-2005A-TX has redundant dual power supply DC input function with extremely wide voltage range (10 ~ 55V), which greatly improves the adaptability and reliability of power input and protects the reliable transmission of network data of industrial automation system. The device has relay alarm output port, and the humanized design can meet the flexible setting of alarm output signal, such as power operation and link alarm of electric port. When there is power failure or link interruption of electric port, the relay will quickly respond to output alarm signal, so as to inform the field personnel to solve the fault in time.

HS-2005A-TX products meet the FCC and CE standards, meet the industrial level 4 design requirements, support normal operation under wide temperature conditions of - 40 ℃ ~ 75 ℃, adapt to harsh working environment conditions, meet the operation requirements of industrial sites, especially suitable for urban intelligent transportation network, urban security, Skynet system, etc. and provide flexible and fast data connection between industrial site automation equipment Cost effective and reliable solution.


Specifications

Explain

Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

Supporting media

10BASE-T CAT3、4、5 UTP(≤100 m)

100BASE-TX CAT5 UTP(≤100 m)

Network interface

5 个 10/100Mbps Self adaptive Ethernet RJ45 shielded port 

Exchange mode

Store and forward

Flow control

Half duplex back pressure, full duplex ieee802.3x

Spanning tree algorithm

IEEE802.1d

Exchange capacity

1.7Gbps

Packet cache size

512Kbits

MAC address table

2K

Indicator light

Power indicator :PWR1,PWR2

Equipment running indicator:RUN

Alarm indicator:ALARM

LINK /ACT, 100m

Transmission distance

Twisted pair 100 m (standard CAT3,4,5 UTP)

Power Supply

Support single / dual 24 VDC redundant input 10 ~ 55 VDC

Power terminal

6-core 5.08mm spacing terminal

Over voltage, over current and reverse connection protection

power waste

no-load power 1.44W(24VDC/0.06A)

Full load power  2.16W(24VDC/0.09A)

Working temperature

-40℃-75℃

Storage temperature

-40℃-85℃

Relative humidity

5%~ 95%(No condensation)

Mechanical structure

Protection grade design of enclosure IP40

Corrugated high strength metal shell 35mm DIN rail mounting

Size

137mm X 125mm X 55mm(L X W X H)

Industry standard

EMI: FCC Part 15,CISPR (EN55022)class A
EMS:
EN61000-4-2 (ESD),Level 4

          EN61000-4-3 (RS),Level 3
          EN61000-4-4 (EFT),Level 4
          EN61000-4-5 (Surge),Level 4
          EN61000-4-6 (CS),Level 3
          EN61000-4-8,Level 5

Impact: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Warranty: 5 years

Certification: CE, FCC, ROHS, UL508 (under certification)

Please check the company website for the latest certification information

 

Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-2005 Series Brief Introduction 2.0.pdf


Product Manual

HS-2005A-TX Manual 2.0.pdf




ModelPortPower inputRemarks

10/100M

Electric port

Interface type
HS-2005A-TX5RJ45DC 10~55VStandard type
HS-2005B-TX5RJ45DC 10~55VBasic type


Batch purchase / product customization
【Business Hotline】:028-85199391 OR 18980011235
【Contact Email】:652503928@qq.com



Home
Product
Select
Contact us