Full Gigabyte | 1 Gigabyte SFP+4 electric port | high end switching single chip scheme
Main Features：
New generation of high-end switching single chip design, stable performance
Support 4-10 / 100 / 1000m RJ45 ports
It supports one Gigabit (100) GBP optical module (LC / SC), and adapts to various Gigabit (100) optical module interfaces and various optical fiber interface types
Full line fast forwarding, backplane bandwidth up to 7gbps
At the same time, it supports the seamless switching of Gigabit (100m) optical fiber communication rate, and can flexibly select and adapt to the communication rate according to the communication site optical fiber system, which greatly improves the convenience and adaptability of engineering site debugging!
It can set the Gigabit / 100M rate manually, and actively adapt to the speed of end-to-end optical fiber equipment, which is very suitable for communication debugging on engineering site!
Manual reset dial switch settings, easy to restart the device, no need to plug the power terminal!
Single channel wide voltage range (10 ~ 55v) DC power input, power input has no polarity and strong voltage adaptability
Ultra low power consumption, less than 2W, all using DC-DC switching power supply design, high power efficiency
Industrial grade 4 design, IP40 protection, corrugated high-strength heat dissipation aluminum alloy plate structure design, DIN rail type installation
Wide temperature range from -40 ℃ to 75 ℃
Strong EMC compatibility, suitable for all kinds of harsh environment
Intelligent transportation video monitoring, industrial automation control and high-speed real-time data network are applicable
Product Introduction ：
HS-6105-1 GSFP is a 5-port (4GTX + 1 GSFP) all Gigabit rail type non network management Industrial Ethernet switch newly developed by Chengdu Huashu Communication Technology Co., Ltd. according to the actual needs of customers. It is a core product of HS-6105 Series. It supports RJ45, LC / SC and other interfaces, adopts the industry's high-end single switch chip scheme, line speed forwarding, stable and reliable operation. HS-6105-1GSFP provides 4-10 / 100 / 1000m Ethernet RJ45 ports and one pluggable GBP Gigabit (100m) optical module interface for uplink long-distance data transmission applications, providing highly flexible, reliable and stable combined applications for industrial equipment networking, data acquisition and transmission.
HS-6105-1 GSFP has a wide DC voltage range (10 ~ 55v) power input capability, which greatly improves the adaptability and reliability of power input and protects the reliable transmission of network data of industrial automation system. HS-6105 Series products meet the FCC and CE standards, meet the industrial level 4 design requirements, support the normal operation under the conditions of wide temperature - 40 ℃ ~ 75 ℃, adapt to the harsh working environment conditions, meet the operation requirements of the industrial site, and provide a powerful means and network system solutions for the construction and operation of the customer's industrial real-time data network.
Specifications | Explain |
Network standards | IEEE802.3，IEEE802.3u，IEEE802.3ab，IEEE802.3x |
Support media | 10BASE-T CAT3、4、5 UTP（≤100m） 100BASE-TX CAT5、6 UTP（≤100m） 1000BASE-T CAT6 UTP（≤100m） SFP pluggable modules: 1000base-x and 100Base-FX, single mode / multimode fiber, LC / SC interface optional 1 * 9 curing optical module: 1000base-x and 100Base-FX, single mode / multimode optical fiber, SC / St / FC interface optional |
Network interface | 4- 10 / 100 / 1000m adaptive Ethernet RJ45 shielded ports Single mode / multi-mode support for 1-100M / gigabit optical module interface (LC / SC) |
Alarm port | One relay normally closed / normally open alarm / I / O port control output |
Dial switch | 4-bit, 100M / gigabit optical module / speed selection, device restart |
Exchange mode | Store and forward |
Flow control | Half duplex back pressure, full duplex ieee802.3x |
Spanning tree | STP |
Exchange capacity | 7.0Gbps |
Packet cache size | 1Mbits |
MAC address table | 8K |
Indicator light | Power indication: PWR1 |
Transmission distance | Twisted pair 100m (standard CAT5,6 UTP) Multimode fiber 850nm, 2km Multimode fiber 1310nm, 5km Single mode fiber 1310nm, 20km Single mode fiber 1310nm, 40km Single mode fiber 1550nm, 60km Single mode fiber 1550nm, 80km |
Power Supply | Single channel 24 VDC redundant input (10 ~ 55 VDC) |
Power terminal | 3-core 5.08mm spacing terminal, over-voltage, over-current, reverse connection protection, dual power redundancy protection |
Power waste | no-load power 2.20W（24VDC/0.09A） |
Working temperature | -40℃-75℃ |
Storage temperature | -40℃~85℃ |
Relative humidity | 5%~95%（No condensation） |
Mechanical structure | IP40 protection grade design, corrugated high strength metal shell DIN rail type installation is adopted Size: 137mm x 111mm x 55mm (L x W x H) |
Industry standard | EMI： FCC Part 15，CISPR (EN55022) class A |
Attack | IEC 60068-2-27 |
Free fall | IEC 60068-2-32 |
Shock | IEC 60068-2-6 |
Warranty | 5 years |
Authentication | CE、FCC、RoHS、UL508(under certification) Please check the company's website for the latest certification information |
| Brief Introduction |
| Product Manual |
Model | Port | Power input | remarks | ||||
10/100/1000M Electric port | 100 / Gigabyte SFP optical port | 100 / Gigabit SC / ST optical port | Interface type | Optical fiber system | |||
| HS-6105A-1GSFP | 4 | 1 | ___ | LC/SC | Single / multi mode | DC 10～55V | Standard type |
| HS-6105B-1GSFP | 4 | 1 | ___ | LC/SC | Single / multi mode | DC 10～55V | Basic type |
| Batch purchase / product customization |
| 【Business Hotline】：028-85199391 OR 18980011235 |
| 【Contact Email】：652503928@qq.com |
