欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-2210 Series 10-port industrial switch with non-network management and rail

2 Gigabit SFP + 8 100M electrical port | IP40 | wide temperature - 40 ℃ ~ 75 ℃ | redundant dual power supply

  • Model: HS-2210A-2GSFP
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 8
  • Port_rate(RJ45): 100M
  • Optical_port_type: SFP(LC/SC)
  • NO.SFP_(LC/SC): 2
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Double
  • Temperature_range: -40℃~75℃

Main Features:

  • Support 8-10 / 100M RJ45 ports

  • Support 2-100 / 1000m SFP ports

  • Store and forward line speed mechanism to ensure data integrity

  • High switching bandwidth and large capacity data buffer ensure reliable transmission of real-time video stream data

  • Redundant dual wide voltage range (10 ~ 55v) DC power input, power input has no polarity and strong voltage adaptability

  • Ultra low power consumption, all using DC-DC switching power supply design, high power efficiency

  • Flexible relay alarm and I / O port control output configuration

  • Industrial grade 4 design, IP40 protection, corrugated high strength metal shell, DIN rail type installation

  • It is very suitable for HD camera video monitoring system and industrial real-time control data network system

 Product Introduction:
        HS-2210A-2GSFP is a 10 port (8 + 2) 10 / 100 / 100M rail type redundant Industrial Ethernet switch newly developed by Chengdu Huashu Communication Technology Co., Ltd. according to the actual needs of customers. It adopts the high-end switching chip with the largest market share in the industry, and has powerful functions, stable operation and reliability. HS-2210A-2GSFP provides 8-10 / 100M Ethernet RJ45 ports and 2- 100 / 1000m SFP interfaces for uplink data transmission applications. It is very convenient to build an industrial control network with high bandwidth and large data throughput, and provides a highly flexible, reliable and stable combined application for industrial equipment networking, data acquisition and transmission.

HS-2210A-2GSFP has redundant dual power supply DC input function with extremely wide voltage range (10 ~ 55v), which greatly improves the adaptability and reliability of power input and protects the reliable transmission of network data of industrial automation system. The device has relay alarm output port, which can be set flexibly and richly with humanized alarm output functions, such as power operation, 10 / 100m electrical port link and so on. When there is power failure or electrical port link change, the relay will quickly respond to output alarm signal, so as to timely inform the field personnel of maintenance and troubleshooting. HS-2210A-2GSFP products meet the FCC and CE standards, meet the industrial level 4 design requirements, support the normal operation under the condition of wide temperature - 40 ℃ ~ 75 ℃, adapt to the harsh working environment, meet the operation requirements of the industrial site, and provide a powerful means and network system solutions for the construction and operation of the customer's industrial real-time data network.

 Specifications

Explain

 Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

 Supporting media 

10BASE-T CAT3、4、5 UTP(≤100m)

100BASE-TX CAT5 UTP(≤100m)

1000BASE-T CAT6 UTP(≤100m)

 Network interface

8-10 / 100Mbps adaptive Ethernet RJ45 shielded ports

2-10 / 100 / 1000m adaptive Ethernet RJ45 shielded ports

 Alarm port

One relay normally closed / normally open alarm / I / O port control output

 Dial switch

10 bits, super ring function enable / disable, master / slave device setting

 Exchange mode

Store and forward

 Flow control

Half duplex back pressure, full duplex ieee802.3x

 Spanning tree algorithm

STP

 Exchange capacity

5.8Gbps

 Packet cache size

12Mbits

 MAC Address table

16K

 Indicator light

Power indication: PWR1、PWR2
Equipment operation indication: RUN
Alarm indication: ALARM
Port indication: 10M、100M、1000M
10 / 100 / Gigabit electrical interface link / data receiving and sending indication: LINK/ACT

 Transmission distance

Twisted pair 100m (standard Cat3, 4, 5, 6 UTP)

 Power Supply

Support single / dual 24 VDC redundant input (10 ~ 55 VDC)

 Power terminal

4-core 5.08mm spacing terminals, over-voltage, over-current, reverse connection protection, dual power redundancy protection

 Power waste

no-load power 5.20W(24VDC/0.22A)
Full load power 6.90W(24VDC/0.29A)

 Working temperature

-40℃-75℃

 Storage temperature

-40℃~85℃

 Relative humidity

5%~95%(No condensation)

 Mechanical structure

IP40 protection grade design, corrugated high strength metal shell

DIN rail type installation is adopted

Size: 137mm x 111mm x 70mm (L x W x H)

 Industry standard

EMI: FCC Part 15,CISPR (EN55022) class A
EMS:EN61000-4-2 (ESD),Level 4
          EN61000-4-3 (RS),Level 3
          EN61000-4-4 (EFT),Level 4
          EN61000-4-5 (Surge),Level 4
          EN61000-4-6 (CS),Level 3
          EN61000-4-8,Level 5

 Attack 

IEC 60068-2-27

 Free fall

IEC 60068-2-32

 Shock 

IEC 60068-2-6

 Warranty 

5 years

 Authentication

CE、FCC、RoHS、UL508(under certification)

Please check the company's website for the latest certification information



Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-2210 Series Brief Introduction 2.0.pdf

Product Manual

HS-2210 Series Manual2.0.pdf



Model
Port
Power input 
remarks
10/100M Electric port1000M Optical interface of SFPsOptical fiber systemCable Type
HS-2210A-2GSFP82Single mode / multi modeCAT3、4、5、6 UTPDC 10~55VStandard type
HS-2210A-2GSFP82Single mode / multi modeCAT3、4、5、6 UTP
DC 10~55V
Basic type


Batch purchase / product customization
【Business Hotline】:028-85199391 or 18980011235
【Contact Email】:652503928@qq.com



Home
Product
Select
Contact us