欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-2205 Series 5-port industrial switch with non-network management and rail

2 SC optical ports + 3 electrical ports | IP30 | redundant dual power supply | automatic alarm | DIN rail type installation

  • Model: HS-2205A-SS-SC
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 3
  • Port_rate(RJ45): 100M
  • Optical_port_type: SC/ST(155M)
  • NO.100_trillion(155M)SC/ST: 2
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Double
  • Temperature_range: -40℃~75℃
  • Serial_port_type: RS232

Main Features:

  • It supports 3-10 / 100M RJ45 ports and two 100M SC / ST / FC optical ports

  • Support 10 / 100M adaptive, full duplex / half duplex, MDI / MDI - X-ray sequence automatic exchange function

  • Store and forward, full line speed data processing mechanism

  • The most stable and reliable high-end switching chip is adopted to meet the stable and reliable operation needs of industrial field environment

  • Redundant dual channel wide voltage range (10 ~ 55v) DC power input, strong voltage adaptability

  • Ultra low power consumption, DC-DC switching power supply design, high power efficiency, small heat

  • Flexible relay alarm output setting

  • IP30 grade protection, corrugated high strength metal shell, DIN rail type installation

Product Introduction: 

    HS-2205 Series is a 5-port (3 + 2) rail type non network management Industrial Ethernet switch, which supports RJ45, SC / ST / FC and other interfaces. It adopts the high-end switching chip with the largest market share in the industry, with strong performance, stable operation and reliability. It is especially suitable for the requirements of high-speed, reliable and stable networking between devices in the industrial field environment. HS-2205 Series provides three 10 / 100M Ethernet RJ45 ports and two remote Ethernet optical ports supporting SC / ST / FC interface, providing highly flexible combined application for interconnection between device ports and remote data transmission.

HS-2205 Series has redundant dual power supply DC input function with extremely wide voltage range (10 ~ 55v), which greatly improves the adaptability and reliability of power input and protects the reliable transmission of network data of industrial automation system. The equipment has relay alarm output port, and the humanized design can meet the flexible setting of alarm output signal, such as the link alarm of power operation, optical port and electrical port. When there is power failure or optical and electrical port link interruption, the relay will quickly respond to output alarm signal, so as to timely inform the field personnel to solve the fault. HS-2205 Series products meet the FCC and CE standards, meet the industrial level 4 design requirements, support the normal operation under the condition of wide temperature - 40 ℃ ~ 75 ℃, adapt to the harsh working environment, meet the operation requirements of the industrial site, and provide flexible, fast, stable and reliable solutions for customers' Industrial Ethernet equipment connection.


Specifications

Explain

Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

Supporting media

10BASE-T CAT3、4、5 UTP(≤100 m)

100BASE-TX CAT5 UTP(≤100 m)

100BASE-FX Single mode / multimode fiber

network interface

3-10 / 100Mbps adaptive Ethernet RJ45 shielded ports

2-155mbps single mode / multi mode optical interface SC / ST / FC

Exchange mode

Store and forward

Flow control

Half duplex back pressure, full duplex IEEE802.3x

Spanning tree algorithm

IEEE802.1d

Exchange capacity

1.7Gbps

Packet cache size

512Kbits

MAC address table

2K

Indicator light

Power indicator: PWR1、PWR2

Equipment operation indicator: RUN

Warning indicator: ALARM

Electric port: LINK/ACT、100M

Optical fiber: LINK/ACT  

Transmission distance

Twisted pair 100 m (standard cat3,4,5 UTP)

Multimode fiber 850nm, 2km

Multimode fiber 1310nm, 5km

Single mode fiber 1310nm, 20km

Single mode fiber 1310nm, 40km

Single mode fiber 1310nm, 60km

Single mode fiber 1550nm, 80km

Power Supply

Support single / dual 24 VDC redundant input 10 ~ 55 VDC

Power terminal

6-core 5.08mm spacing terminal

Over voltage, over current and reverse connection protection

power waste

no-load power 2.64W(24VDC/0.11A)

Full load power 3.60W(24VDC/0.15A)

Working temperature

Standard temperature - 10 ℃ - 65 ℃

Wide temperature range - 40 ℃ - 75 ℃ (optional)

Storage temperature

-40℃-85℃

Relative humidity

5%~ 95%(No condensation)

Mechanical structure

IP30 protection grade design of enclosure

Corrugated high strength metal shell

35mm DIN rail mounting

Size

137mm X 125mm X 55mm(L X W X H)

Industry standard

EMI: FCC Part 15,CISPR (EN55022)class A
EMS:

 EN61000-4-2 (ESD),Level 4
 EN61000-4-3 (RS),Level 3
 EN61000-4-4 (EFT),Level 4
 EN61000-4-5 (Surge),Level 4
 EN61000-4-6 (CS),Level 3
 EN61000-4-8,Level 5

Impact: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Warranty: 5 years

Certification: CE, FCC, ROHS, UL508 (under certification)

Please check the company website for the latest certification information


Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-2205 Series Brief Introduction 2.0.pdf


Product Manual

HS-2205 Series Manual 2.0.pdf



Model

Port


Power input

Remarks

10/100M

Electric port

155M

Optical fiber

Interface type

Optical fiber system

HS-2205A-SS-SC/ST/FC

3

2

SC/ST/FC

Single mode

DC 10~55V

Standard type

HS-2205B-SS-SC/ST/FC

3

2

SC/ST/FC

Single mode

DC 10~55V

Basic type

HS-2205A-MM-SC/ST/FC

3

2

SC/ST/FC

multimode

DC 10~55V

Standard type

HS-2205B-MM-SC/ST/FC

3

2

SC/ST/FC

multimode

DC 10~55V

Basic type


Batch purchase / product customization
【Business Hotline】:028-85199391 OR 18980011235
【Contact Email】:652503928@qq.com

 




Home
Product
Select
Contact us