Support 4-10 / 100M RJ45 ports and 4-155M SC / ST ports
Comply with IEEE 802.3 10 Mbps Ethernet standard, IEEE 802.3u 100 Mbps Ethernet standard, IEEE 802.3x flow control standard
Store and forward switching mechanism is adopted to support rate adaptability and ensure data integrity
It supports full duplex / half duplex automatic monitoring, adaptive communication mode and MDI / mdi-x port adaptive, and cross line and through line can be used freely
Non blocking switching fabric, full line speed forwarding
Port automatic MAC address learning and aging function
Port LED status indication, which can easily detect the link connection, rate, data receiving and sending status of each port
The alarm of power supply, optical fiber port and RJ45 electric port can be set flexibly. At the same time, it supports led, menu alarm prompt and relay alarm output
Fully support layer 2 network management protocol
Low power design, all using DC-DC switching power supply, high efficiency, low power consumption
Industrial standard, no fan structure design
IP40 protection, corrugated high strength housing
HS-2408 Series is a rail type non network management Industrial Ethernet switch with powerful data switching and forwarding function independently developed by Chengdu Huashu Communication Technology Co., Ltd. It is a switching device designed with high-speed single chip switching scheme and networking with Ethernet protocol in industrial production environment. It is simple, convenient and fast to use, and has stable performance Reliable. It adopts industrial high-strength IP40 shell design, and has super strong EMC protection level. Through the high-level test of 15kV electrostatic air discharge and 8Kv contact discharge, it ensures that the equipment can operate stably and reliably in the industrial field environment.
HS-2408 Series supports four 100M Ethernet optical fiber interfaces (optional SC / ST / FC interface) and four 10 / 100M Ethernet electrical interfaces (RJ45). It supports 10Base-T, 100base TX, 100base FX, full duplex, half duplex and MDI / mdi-x adaption. The optical fiber interface supports 100base FX, and can be in single mode (SM) or multi-mode (MM) mode.