欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-2008 Series 8-port industrial switch with non-network management and rail

Full port | 100M | redundant dual power supply

  • Model: HS-2008A-TX
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 8
  • Port_rate(RJ45): 100M
  • Supply_voltage: DC24V,DC12V
  • Temperature_range: -40℃~75℃
  • Serial_port_type: RS232

Main Features:

  • Support 8-10 / 100M RJ45 ports

  • Support 10 / 100M adaptive, full duplex / half duplex, MDI / MDI X-ray sequence automatic switching function, store and forward, full line speed data processing mechanism

  • The most stable and reliable high-end switching chip is adopted to meet the stable and reliable operation needs of industrial field environment

  • Redundant dual wide voltage range (10 ~ 55v) DC power input, strong voltage adaptability

  • Ultra low power consumption, all using DC-DC switching power supply design, high power efficiency, small heat

  • Flexible relay alarm output setting

  • IP40 grade protection, corrugated high strength metal shell, DIN rail type installation

Product Introduction:

   HS-2008A-TX is an 8-port 10 / 100M rail type non network management Industrial Ethernet switch, which supports 8-RJ45 interfaces and adopts the high-end switching chip with the largest market share in the industry. It has strong performance, stable operation and reliability, and is especially suitable for the requirements of high-speed, reliable and stable networking between devices in the industrial field environment.

HS-2008A-TX provides 8-10 / 100M Ethernet RJ45 ports, providing highly flexible combined application for interconnection between device ports and data transmission in LAN. HS-2008A-TX has redundant dual power supply DC input function with extremely wide voltage range (10 ~ 55V), which greatly improves the adaptability and reliability of power input and protects the reliable transmission of network data of industrial automation system. The device has relay alarm output port, and the humanized design can meet the flexible setting of alarm output signal, such as power operation and link alarm of electric port. When there is power failure or link interruption of electric port, the relay will quickly respond to output alarm signal, so as to inform the field personnel to solve the fault in time. HS-2008A-TX products meet the FCC and CE standards, meet the industrial level 4 design requirements, support the normal operation under the condition of wide temperature - 40 ℃ ~ 75 ℃, adapt to the harsh working environment, meet the operation requirements of the industrial site, and provide flexible, fast, stable and reliable solutions for customers' Industrial Ethernet equipment connection.

 


Specifications

Explain

Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

Supporting media

10BASE-T CAT3、4、5 UTP(≤100m)

100BASE-TX CAT5 UTP(≤100m)

100BASE-FX Single mode / multimode fiber

network interface

8 10 / 100Mbps adaptive Ethernet RJ45

Shielded port

Exchange mode

Store and forward

flow control

Half duplex back pressure, full duplex ieee802.3x

Spanning tree algorithm

IEEE802.1d

exchange capacity

2.9Gbps

Packet cache size

12Mbits

MAC address table

16K

indicator light

Power indicator: PWR1、PWR2

Equipment operation indicator:RUN

Warning indicator:ALARM

Electric port:LINK/ACT、100M

transmission distance

Twisted pair 100 m (standard CAT 3,4,5 UTP)

Power Supply

Support single / dual 24 VDC redundant input 10 ~ 55 VDC

Power terminal

6-core 5.08mm spacing terminal

Over voltage, over current and reverse connection protection

Power waste

no-load power  1.2W(24VDC/0.05A)

Full load power  2.4W(24VDC/0.10A)

Working temperature

-40℃-75℃

Storage temperature

-40℃-85℃

Relative humidity

5%~ 95%(No condensation)

Mechanical structure

IP30 protection grade design of enclosure

Corrugated high strength metal shell

35mm DIN rail mounting

Size

137mm X 125mm X 53.5mm(L X W X H)

Industry standard

EMI: FCC Part 15,CISPR (EN55022)class A
EMS:

 EN61000-4-2 (ESD),Level 4
 EN61000-4-3 (RS),Level 3
 EN61000-4-4 (EFT),Level 4
 EN61000-4-5 (Surge),Level 4
 EN61000-4-6 (CS),Level 3
 EN61000-4-8,Level 5

Impact: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Warranty: 5 years

Certification: CE, FCC, ROHS, ul508 (under certification)

Please check the company website for the latest certification information



Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-2008 Series Brief Introduction 2.0.pdf


Product Manual

HS-2008A-TX  Manual 2.0.pdf



Model

Port

Power input

remarks

10/100M

Electric port

Interface type

HS-2008A-TX8RJ4510~55VStandard type

HS-2008B-TX

8

RJ45

10~55V

Basic type


Batch purchase / product customization
【Business Hotline】:028-85199391 or 18980011235
【Contact email】:652503928@qq.com



Home
Product
Select
Contact us