欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Rail-non network management

HS-2206 Series 6-port Rail type long distance (long network cable) non network management industrial switch

2-long distance (long network line) port + 4-ordinary electric port | 100 trillion | relay alarm

  • Model: HS-2206A-2LTX
  • Management: Non-network management
  • Installation_method: Guideway
  • NO.ports(RJ45): 6
  • Port_rate(RJ45): 100M
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Double
  • Temperature_range: -40℃~75℃,-20℃~70℃
  • NO.LRIES_ports(RJ45): 2
  • LRIES_(RJ45)rate: 10M,100M
  • Serial_port_type: RS232

Main Features:

  • Four 10 / 100M RJ45 ports are supported;

  • It supports two long-distance RJ45 ports. In the long-distance mode (lries proprietary technology), the transmission rate can reach 100 Mbps in the standard class 5 twisted pair medium, and the transmission distance can reach more than 600 meters!

  • Long distance RJ45 port supports 10 / 100 / 1000m standard Ethernet RJ45 port at the same time, truly realizing the full compatibility between long distance mode (lries mode) and standard mode!

  • The long-distance transmission interface automatically detects the line quality, automatically sets the actual long-distance data transmission rate and twisted pair pair (1 pair, 2 pairs and 4 pairs), without manual intervention at all!

  • Rich equipment working status LED indicator! In the long distance mode (lries mode) and standard mode, the transmission interface link establishment, data receiving and sending, and rate status indication are clear at a glance!

  • Redundant dual wide voltage range (10 ~ 55v) DC power input, power input has no polarity and strong voltage adaptability

  • Ultra low power consumption, all using DC-DC switching power supply design, high power efficiency

  • Flexible relay alarm and I / O port control output configuration

  • Industrial grade 4 design, IP40 protection, corrugated high strength metal shell, DIN rail type installation

  • It fills the gap in the field of long distance and high bandwidth transmission of domestic industrial Ethernet twisted pair!

Product Introduction:

HS-2206A-2LTX is a 6-port (4+2) rail non network management long-distance Industrial Ethernet switch with small ports, which is newly launched by Chengdu Huashu Communication Technology Co., Ltd. according to the actual needs of customers. It supports the RJ45 port of 10/100/1000m standard and 10/100m long-distance RJ45. It adopts the high-end switch single chip scheme in the industry market, which has strong function, stable operation and reliability.

HS-2206A-2LTX provides 4 10/100m Ethernet RJ45 ports, 2 10/100m long-distance RJ45 ports (lries proprietary technology) for long-distance data transmission applications, which is very convenient to establish a real-time industrial control network with high bandwidth and long-distance transmission; Two RJ45 ports can be transmitted from a long distance using standard 3, 4 and 5 lines for long-distance data transmission. The longest transmission distance can reach 900 meters at 10Mbps, and the farthest transmission distance can reach more than 600 meters at 100Mbps! It can be used to build high reliability and high stability Industrial Ethernet data network under the condition that the distance between nodes is more than 100 meters, and the environment is not easy to use single mode / multimode fiber cable. The network radius of reliable transmission of twisted pair data of 3, 4 and 5 is greatly extended, which effectively solves a series of complicated and complicated network wiring and maintenance work such as inconvenient optical fiber wiring, tail fiber fusion and more dust, and is automatically compatible with the standard 10/100/1000m RJ45 interface, The paper solves many technical and maintenance problems in the industrial networking site, and provides a highly flexible, reliable, stable and convenient combination application for the networking of industrial equipment, data collection and transmission.

HS-2206A-2LT has redundant dual power DC extremely wide voltage range (10-55v) input function, which greatly improves the adaptability and reliability of power input. The equipment has relay alarm output port, humanized setting, flexible and rich alarm output functions, such as power operation, standard port and long-distance port link real-time monitoring alarm. When power failure or the status of the electrical port link changes, the relay will respond to output alarm signal quickly, so as to timely inform the field personnel to maintain and eliminate the fault.

HS-2206A-2LTX products meet FCC and CE standards, meet the requirements of industrial level 4 design, support normal operation under the condition of wide temperature of -40 ℃ ~ 75 ℃, adapt to the harsh working environment conditions, meet the operation requirements of industrial site, and provide customers with a network solution with real-time, high bandwidth and long-distance data transmission.


 Specifications

Explain

 Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

 Supporting media 

10BASE-T CAT3、4、5 UTP(≤100m)

100BASE-TX CAT5 UTP(≤100m)

1000BASE-T CAT5、6 UTP(≤100m)

LRIES:CAT3、4、5、6 UTP(100m~500m)

 Network interface

Four 10 / 100Mbps adaptive Ethernet RJ45 shielded ports

Two 10 / 100M long distance RJ45 shielded ports (lries proprietary technology)

Two 10 / 100 / 100M standard Ethernet RJ45 shielded ports (shared with long distance ports and automatically compatible with standard mode)

 Alarm port

One relay normally closed / normally open alarm / I / O port control output

 Dial switch

4 bits, long distance communication rate adaptive / manual selection, 10m / 100M rate selection

 Exchange mode

Store and forward

 Flow control

Half duplex back pressure, full duplex ieee802.3x

 Spanning tree algorithm

STP

 Exchange capacity

7.0Gbps

 Packet cache size

1Mbits

 MAC address table

8K

 Indicator light

Power indication pwr1, pwr2

Equipment operation indication run

Alarm indication arm

100M / Gigabit port link indication 10m, 100m, 1000M

Long distance port communication indication link, act

 Transmission distance

Twisted pair 100 m (standard cat3,4,5 UTP)

Twisted pair 100 ~ 900m (standard Cat3, 4, 5, 6 UTP)

 Power Supply

Support single / dual 24 VDC redundant input (10 ~ 55 VDC)

 Power terminal

4-core 5.08mm spacing terminals, over-voltage, over-current, reverse connection protection, dual power redundancy protection

 power waste 

no-load power 2.80W(24VDC/0.12A)
Full load power 3.30W(24VDC/0.14A)

 Working temperature

-40℃-75℃

 Storage temperature

-40℃~85℃

 Relative humidity

5%~95%(No condensation)

 Mechanical structure

IP40 protection grade design, corrugated high strength metal shell

DIN rail type installation is adopted

Size: 137mm x 111mm x 55mm (LxWxH)

 Industry standard 

EMI: FCC Part 15,CISPR (EN55022) class A
EMS:EN61000-4-2 (ESD),Level 4
          EN61000-4-3 (RS),Level 3
          EN61000-4-4 (EFT),Level 4
          EN61000-4-5 (Surge),Level 4
          EN61000-4-6 (CS),Level 3
          EN61000-4-8,Level 5

 Attack

IEC 60068-2-27

 Free fall

IEC 60068-2-32

 Shock 

IEC 60068-2-6

 Warranty

5 years

 Authentication

CE、FCC、RoHS、UL508(under certification)

Please check the company's website for the latest certification information


Huashucom enterprise content manager system | MetInfo CMS

Brief Introduction

HS-2206 Series Brief Introduction 2.0.pdf


Product Manual

HS-2206A-2LTX Product Manual 2.0.pdf



Model
Port
Power inputremarks 
10/100M Electric portLong distance / standard portInterface typeTransmission medium
HS-2206A-2LTX42/2RJ45Standard UTP 3、4、5、6DC 10~55VStandard type
HS-2206B-2LTX

4

 2/2

RJ45

Standard UTP 3、4、5、6

DC 10~55VBasic type

 

Batch purchase / product customization
【Business Hotline】:028-85199391 OR 18980011235
【Contact Email】:652503928@qq.com



Home
Product
Select
Contact us