欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Bus type

HS-3313 Series 3-Port(2+1)Bus network extender

1 long distance port + 2 common port | DC-DC switching power supply

  • Model: HS-3313S-RJ45
  • Management: Non-network management
  • Installation_method: Base plate
  • NO.ports(RJ45): 2
  • Port_rate(RJ45): 100M
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Single
  • Temperature_range: -40℃~75℃
  • NO.LRIES_ports(RJ45): 1
  • LRIES_(RJ45)rate: 100M
  • Serial_port_type: RS232

Main Features:

  • Two 10 / 100M Ethernet RJ45 ports and one xDSL remote RJ45 / RJ11 port

  • Support 10 / 100M adaptive, full duplex / half duplex, MDI / MDI - X-ray sequence automatic exchange function

  • Store and forward, full line speed data processing mechanism

  • The most stable and reliable high-end switching chip is adopted to meet the stable and reliable operation needs of industrial field environment

  • Using DC-DC switching power supply design, high power efficiency, small heat

  • Ultra low power consumption, maximum power consumption less than 1.2W

  • Set up long distance data transmission network, simple and fast, plug and play

  

Product Introduction:      

HS-3313S bus network extender is a kind of network transmission equipment which uses low-power signal modulation and demodulation technology, and can transmit Ethernet signal through twisted pair, telephone line and other common cables for long distance. The maximum transmission distance is more than 2 km, and the maximum speed is 800 Kbps. HS-3313S can be used in the situation of point-to-point data transmission, and can also form a point-to-multipoint bus network. It is especially suitable for the application of long-distance industrial sensor data acquisition. At the same time, it can transmit telephone voice signal while transmitting data acquisition. Therefore, the original telephone line network can be used for network signal transmission, It does not affect the normal use of the telephone. It is compatible with IEEE802.3 10m / 100M Ethernet network and easy to install. It can be transmitted by using a pair of twisted pair (or telephone line) or by using existing telephone line; Strong real-time performance, small network delay, strong anti-interference ability, low power consumption design, DC-DC switching power supply design, the maximum power consumption is not more than 1.2W, suitable for industrial environment, plug and play, no need to install any computer driver and software settings.

Specifications

Explain

Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

Supporting media

10BASE-T CAT3、4、5 UTP(≤100 m)

100BASE-TX CAT5 UTP(≤100 m)

Network interface

2-10 / 100Mbps adaptive Ethernet RJ45 shielded ports

(connect PC or industrial transmission and acquisition equipment)

Remote transmission interface

One RJ45 / RJ11 remote interface

Flow control

Half duplex back pressure, full duplex IEEE802.3x

Spanning tree

IEEE802.1d

Maximum transmission rate

800kbps

Number of access nodes

Up to 32

Maximum transmission distance

2km or more

Indicator light

Power supply indicates PWR, signal synchronization and data forwarding indicate act

Link / act, 100m

Power input

Single 5VDC input 

Power mode

Normal power mode and high power burst mode

Power waste

power 1.2W(5VDC/0.24A)

Working temperature

-10℃-65℃

Storage temperature

-40℃-85℃

Relative humidity

5% to 95% (no condensation)

Mechanical structure

Base plate 

Size

107mm X 92mm X 28mm(L X W X H)

Industry standard

EMI: FCC Part 15,CISPR (EN55022)class A

Warranty

3 years



 


Brief Introduction



Product Manual



Model

port


Power input

10 / 100M electrical port

Interface type

XDSL remote port

Interface type

HS-3313S-RJ45

2

RJ45

1

RJ45

DC 5V

HS-3313S-RJ11

2

RJ45

1

RJ11

DC 5V

 

Batch purchase / product customization

【Business Hotline】:028-85199391 or 18980011235
【Contact Email】:652503928@qq.com

Home
Product
Select
Contact us