欢迎进入成都华枢通信官网,我们的产品有:工业交换机(环网交换机)、光纤交换机、交换机模块、定制模块、定制板卡、工业级光纤收发器、网络延长器、4G/5G工业路由器、4G/5G物联网网关。

Long distance and point to point

HS-E3312 Series 2-Port(1+1)Point to point long distance network extender series

1 long distance electrical port + 1 common electrical port | long distance point-to-point | non network management

  • Model: HS-E3312L-RJ45
  • Management: Non-network management
  • Installation_method: Base plate
  • NO.ports(RJ45): 1
  • Port_rate(RJ45): 100M
  • Supply_voltage: DC24V,DC12V
  • NO.power_input_groups: Single
  • Temperature_range: -40℃~75℃
  • NO.LRIES_ports(RJ45): 1
  • LRIES_(RJ45)rate: 100M
  • Serial_port_type: RS232

Main Features :

  • One 10 / 100M RJ45 port, one xDSL remote RJ45 / RJ11 port

  • Support 10 / 100M adaptive, full duplex / half duplex, MDI / MDI - X-ray sequence automatic exchange function

  • Store and forward data processing mechanism

  • Using DC-DC switching power supply design, high power efficiency, small heat

  • Low power consumption, maximum power consumption less than 4.3W

  • Base plate installation, imported high-grade three proofing paint protection treatment, strong corrosion resistance

  • Set up long distance data transmission network, simple and fast, plug and play

 Product Introduction:       

    HS-E3312L network extender is a high-speed network device that uses high-speed long-distance xDSL modulation and demodulation technology to transmit Ethernet data through twisted pair, telephone line and other common cables for long-distance transmission. The maximum transmission distance can reach more than 6 km, and the maximum bandwidth can reach more than 70 Mbps. HS-E3312L needs to be used in pairs, one as the office end and one as the user end. It can transmit the telephone signal while transmitting the network data signal. Therefore, the original telephone line network can be used to transmit the network signal without affecting the normal use of the telephone. Compatible with IEEE802.3 10m / 100M Ethernet network, 0-100m speed can reach 70mbps, 1.2km speed can reach more than 10Mbps, simple installation, using a pair of twisted pair (or telephone line) can be transmitted, can also use the existing telephone line; Strong real-time, small network delay, strong anti-interference, suitable for industrial environment, no need to install any computer driver and software settings. Base plate installation, which can be used alone or easily integrated into user system equipment, provides a flexible, fast and powerful data remote transmission solution for the interconnection of high-speed data equipment within 6 km.

Specifications

Explain

Network standards

IEEE802.3,IEEE802.3u,IEEE802.3x

Supporting media

10BASE-T CAT3、4、5 UTP(≤100 m)

100BASE-TX CAT5 UTP(≤100 m)

Network interface

1-10 / 100Mbps adaptive Ethernet RJ45 shielded port

Remote transmission interface

1- RJ45 / RJ11 remote interface

Flow control

Half duplex back pressure, full duplex IEEE802.3x

Spanning tree

IEEE802.1d

100m transmission rate

70Mbps

1.2km transmission rate

10Mbps

Maximum transmission distance

6km or more

Indicator light

Power supply indicates PWR, signal synchronization and data forwarding indicate act

Link / act, 100m

Power input

Single 5VDC input

Power terminal

4-core 2.54mm spacing terminal

Power waste

Maximum power 4.3W (5VDC / 0.86a)

Working temperature

Standard temperature - 10 ℃ - 65 ℃

Storage temperature

-40℃-85℃

Relative humidity

5% to 95% (no condensation)

Installation structure

Base plate installation

Size

93mm X 83.5mm X 28mm(L X W X H)

Industry standard

EMI: FCC Part 15,CISPR (EN55022)class A

Warranty

3 years


Brief Introduction



Product Manual



Model

Port

Power input

Ethernet 10 / 100M interface

Interface type

XDSL remote port

Interface type

HS-E3312L-RJ45

1

RJ45

1

RJ45

DC 5V

HS-E3312L-RJ11

1

RJ45

1

RJ11

DC 5V



Batch purchase / product customization

【Business Hotline】:028-85199391 or 18980011235
【Contact Email】:652503928@qq.com

Home
Product
Select
Contact us